DC ON/OFF Switch (48DC - 125DC)
DC ON/OFF Switch (48DC - 125DC) DC ON/OFF Switch (48DC - 125DC)

DCWS-48125 30-Amp ON/OFF Switch

The DCWS-48125 is a 30-Amp ON/OFF switch features a double pole 30 ampere non-reversing surface toggle switch. Placing the DCWS-48125 Switch before a DC power load eliminates in-rush current, providing reliable ON/OFF control of 48DC to 125DC light fixtures.  UL listed, CSA and CE mark.


DCWS:                                   DC Wall Switch

Maximum Input Voltage:       230DC

Max. Current:                         30 Amps 2 Pole 1 Phase

Connections:                          Screw clamp terminals

Wires:                                     Use 14-20 WAG cables

Operating Temp:                    0°C to 50°C    

Unit Size:                                1.69”x 2.34”x 4.13”

Protection:                              Reverse & Static

Dimming:                                None

Switch type:                            Non reversing      

Warranty:                                2 years

Certification:                           UL listed, CSA & CE mark


Use both poles in parallel, by spitting the (+) wire into a Y connecting to the switch. Split each wire into one (1) of the two (2) poles (internal Contacts). Recombine (+) wires into a Y on the output of the Switch to the light fixture(s). The two (2) poles see half (1/2) the current entering the load. (See Installation Recommendation Schematic.) 

Marshall DC Lighting 5350 East Deer Valley Road, Suite 4400, Phoenix, AZ 85054